C/Z Purlin Forming Machine

Detailed Product Description

Detail information of the C/Z purlin forming machine as follows:

First, technical parameters:
Rolling speed :5-10 m / min
Rolling thickness :2-4 mm
Rolling width :80-300 mm
Roll: 16
Host Power: 11 kW (Tyrone)
Hydraulic cut off: 11 kilowatts
Dimension: 11.8 meters * 1.8 meters * 1.4 meters
Weight: about 11 tons

Second, configure:
1. Discharge institutions: one set
2. level institutions:one set
3. Forming the host: one set
4. Punching, shearing: one set
5. Hydraulic station: one set
6. Computer control cabinet: one set
Including: Mitsubishi programmable PLC
       Mitsubishi series touch screen
Panasonic Inverter Series
       Omron encoder
7. Entrusted Rack: one set

Third, the process
 open the coil - Leveler - molding - Correction - punching cut off - material

Fourth, the characteristics

1, the machine-style cantilevered umbrella unpowered aircraft discharge discharge, regulating discharge screw end frame to adapt to different aperture of the strip, easy to operate, discharge speed and forming host synchronization.

2, the machine level using five roller, roller used 40Cr quality alloy steel, formed by heat treatment processing of the defective strip ping school has very good effect.

3, host selection GCr15 roller bearing steel by Forge to stress annealing, quenching and tempering, phosphating treatment, such as a series of heat treatment process, the surface hardness up to HRC60 degrees, all roll formed by the CNC lathe to ensure the roll size accuracy and extended service life.

4, unit specifications used in the replacement of sets of the form of semicircle deduction deduction than old-fashioned sets jump ring buckle sets a more reasonable, efficient, reducing the intensity of operation of the workers.

5, this machine is equipped with two levels of roll correction system, five groups edger Straightening system. In production to adapt to the needs of poor strip, regulating speed and convenience, and ensuring product quality.
6, pressure reinforcement parts for user needs in plane C-shaped steel bars used in pressure, it can enhance the strength of C-shaped steel, hot-rolled steel strip to remove the existence of the waves, to meet different customer needs.

7, punching assembly is a high degree of automation systems, it is set under the control of the computer can easily complete you want the installation process at any location hole, using a professional mold material GCr12 Die with steel, in strict accordance with Automatic Process refined red from cold, with the reliability, convenience and strong characteristics.

8, length is cut off on the unit after the procedure, under the control of the computer can be timely and accurate shear you need any size, it is by the hydraulic-driven, shape, edge and tool carrier component, shear knife-edge with Cr12 Die with steel made in strict accordance with the processing process, the shear effect with a good face shape, shear and low cost, high dimensional accuracy, cutting off all forms of the ideal shear mode.