keel molding machine

Detailed Product Description

Detail information of the keel molding machine as follows:

A.Main technical parameter

1       Raw Material : hot-dip galvanization steel strip

2       The thickness of the raw material: 0.4-0.7mm

3       The width of the feed-in: 150mm

4       The inner diameter of the steel coil : 508-600mm

5       The outer diameter of the steel coil : 1200MM

6       Main forming machine motor:Electromagnetic speed motor 7.5kw

7       Working voltage 380v 50hz  control voltage 24v

8       Forming steps: 12steps

9       Main forming machine use welded steel structure

10     Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )

11     Roller shaft use 45# steel, modulation disposal, the hardness of the modulation is  HB250-280.surface grinding. The outer diameter is 60mm

12     Roller mould use Gcr15,salt bath quenching.hardness is HRC58-62

13     The fastest production speed 20M-30M/ minute

14     The max tolerence of the forming keel is 0.30mm

15     Feed-in material way : from left to right

B .cutting equipment

16     hydraulic prssure qua power switch off

17     The ability of the cutting: 6tons

18     Hydraulic system pressure: 12Mpa. Work pressure 5Mpa

19     The form of the cutting: 45 degree skew

20     cutting scrap: no

21     The cutting machine frame use the high structural frame welding

22   The cutting mould is mould steel CR12, salt quenching hardness  is HRC60-62

23     Cutting length tolerance <= 1.5mm Feed-in machine

24     Steel structure frame

25     Manual

26     Max bear weight of machine is 2tons

C.The whole production line

Feed-in machine --- material right/left guide --- correct calm machine molding mainframe roll mould ---finished product correct straight machine --- hydraulic prssure cutting equipment( hydraulic pressure station) ----- track cutting stepped vehicle sever mould ---- received frame of material --- electric control box